Corner Summerhouse 35 - Shiplap, Georgian, Double Door, Fitted Free

• Free same day installation
• All timber used in the construction of this summerhouse originates from sustainable forests
• Scandinavian redwood or whitewood
• All summerhouses are either pressure treated (lifetime preservative treatment) or treated by total immersion in a high quality based preservative
• Strong ex 2" planed framework (45mm x 33mm finished size after machining)
• 12mm deal tongued and grooved shiplap cladding (finished size after machining)
• 12mm deal tongued and grooved floor boards (finished size after machining)
• 12mm deal tongued and grooved roof boards (finished size after machining)
• Strong ex 2" floor joists
• Strong ex 2" planed roof purlins (45mm x 33mm finished size after machining)
• 6'x6' summerhouse includes 2 non opening 6 pane Georgian style windows, one each side
• All other summerhouses include 2 fully opening 9 pane Georgian style windows, one each side
• Joinery windows glazed with 3mm annealed glass and vertical timber beads with external silicone seal
• Fully glazed Georgian style joinery double doors
• Black antique style door handles and hinges
• Mortice lock with handle and keys
• Green mineral felted roof
• Internal height at the lowest point inside 6'3" (1900mm)
• Height at the rear 6'9" (2070mm) on 10'x10' summerhouses
• Height at the front 7'4" (2236mm) on 10'x10' summerhouses
• Height at the rear 6'7" (2000mm) on all other summerhouses
• Height at the front 7'1" (2166mm) on all other summerhouses

FREE SAME DAY INSTALLATION - THE BENEFITS: Our free in house installation service is not just convenient, it is also your assurance of a better quality summerhouse. This is because any building which includes free installation is invariably better made using quality components. Over time regular feedback from fitters ensures that design faults and weaknesses have been rectified. Same day installation is convenient for you and cost effective because it saves travelling costs. The fitters will deliver your summerhouse and then install it, all at the same time. Others send sub-contract fitters separately, often from far away and often a week or two after the delivery. Waiting for the fitter can be very frustrating. Sub-contract fitting is also much more expensive because of the travelling costs. The fitting service does not include base preparation. A flat and level base is required, which can be made using concrete, paving slabs, pressure treated timber or plastic. In many areas we offer a base laying service as an option. We also offer heavy duty plastic base kits in all areas.

SCANDINAVIAN REDWOOD OR WHITEWOOD: The most widely used timber in the UK for years, Scandinavian Redwood and Whitewood grow in the well managed forests of Scandinavia and the coldest parts of Northern Europe. The cold climate ensures slow growth. The growth rings are much closer together than faster growing trees from warmer climates. As a result the timber is heavy and durable with a close grain pattern. The wood is seasoned and kiln dried to achieve the correct moisture content before it is machined. Redwood and Whitewood are so similar in appearance and performance that it is difficult to tell the difference. Both are classified as slightly durable and treatment is required for outside use. The forests of Scandinavia and Northern Europe have been responsibly managed on a sustainable basis for centuries so Scandinavian Redwood or Whitewood is an enviromentally friendly choice.

PLANED SHIPLAP CLADDING: These summerhouses feature smooth planed fully interlocking tongued and grooved shiplap wall cladding. This design ensures that rainwater drains faster and the timber dries quicker, which ensures a longer life for your summerhouse. Our shiplap is fully tongued and grooved which is stronger than the half lap shiplap or rebated shiplap used by some others.

JOINERY DOORS AND WINDOWS: A feature of these quality summerhouses is the joinery doors and windows with morticed and tenoned joints throughout. These intricate joints are harder to pull apart and therefore stronger. The ends of the timber are also better protected and therefore more durable.

GEORGIAN GLAZING: These summerhouses feature Georgian style glazing with individual panes of glass, unlike most Georgian style summerhouses with criss cross shaped beads fitted over one large pane of glass. These smaller panes of glass are much harder to break and less dangerous when broken. The individual panes of glass are securely beaded within a substantial timber joinery frame. A considerable force is required to shatter the glass. Toughened safety glass is not normally necessary with such small panes of glass and if required it is more expensive in small panes.

CORNER BUILDING SIZES: For ease of reference these corner summerhouses are measured as a square based on the width of the two longest walls. Sizes are sometimes rounded to the nearest nominal size for ease of reading but the correct external wall sizes are listed alongside the price. These sizes do not include the roof overhang. Many other suppliers quote the overall roof size which is much larger. All sizes are approximate.

• Choice of pressure treated timber (lifetime preservative treatment) or timber treated by total immersion in a high quality preservative
• Pressure treated 3" x 3" floor bearers (lifetime preservative treatment)
• Heavy duty floor with ex 3/4" thick tongued and grooved boards (15mm finished size after machining)
• Toughened glass
• One piece EPDM rubber roof membrane, a tough roof surface which is virtually maintenance free
• Portable indoor gas heaters - no need for an electricity supply or trailing leads
• This summerhouse can be made in smaller sections if access is restricted
• A choice of composite decking kits

PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with normal wood preservative in any colour.

FLOOR BEARERS: Bearers are substantial pressure treated beams under the floor, which will prolong the life of your summerhouse. The bearers are the only part of the summerhouse which is in contact with the ground and they are pressure treated for longer life. The bearers also raise the floor above the ground. This allows air to circulate under the floor to reduce dampness and also reduces saturation of the lower cladding boards.

HEAVY DUTY FLOOR: The standard floor is stronger than most summerhouse floors and suitable for normal use. It features 12mm thick tongued and grooved boards with 2" thick floor joists spaced close together for improved strength. The heavy duty floor features the same bearer size and spacing but with 15mm thick tongued and grooved boards, which is exceptionally strong and suitable for storing heavier items.

ONE PIECE EPDM ROOF: A tough EPDM rubber membrane is made in one piece to the size of your roof with no joins. It is easily fitted within a few minutes at normal temperatures with no heat required. EPDM rubber is completely inert, UV stable and not affected by extreme temperatures. It never perishes and it will not rot, split, crack or degrade. EPDM rubber lasts for years with little or no maintenance. It has been widely used in flat roofing for over 40 years from Alaska to the Middle East. It is increasingly popular in the UK where it is widely used for re-roofing flat roof garages and extensions. Even in extreme weather conditions EPDM rubber remains flexible and it will stretch to absorb any movement as a timber roof expands and contracts with the seasons.

WPC COMPOSITE DECKING KITS: This superb quality WPC wood plastic composite decking closely resembles real wood, with the same look and feel. However, it is virtually maintenance free and it will never rot. At a glance it is difficult to tell the difference between this composite material and real timber decking with a stained finish. Furthermore, the similarities are not skin deep like a thin veneer. The realistic finish has a fibrous surface which looks similar to the grain of real wood. This synthetic composite is also heavier and stronger than real wood. The strength, durability and lack of maintenance make this superb decking a popular choice with pensioners and discerning commercial buyers such as care homes. Occasional cleaning with soapy water normally restores the original appearance. If any dirt or stains become ingrained after prolonged neglect even the most stubborn marks can be cleaned with a pressure washer.

Our WPC composite decking is a revolutionary material which provides all the benefits of real wood without the maintenance. It can be left outside uncovered all year round. Unlike real wood this synthetic wood is a weatherproof material with no knots, splinters, machining marks or other imperfections. It will never develop splits or shakes and no sap will ever ooze out of it. Our wood plastic composite is an equal mixture of real wood and recycled plastic. Even the wood is a mixture of sawdust and unusable offcuts, so it is the ultimate environmentally friendly alternative to wood. The colour pigments are mixed in before the powdered composite is moulded into shape, so the colour runs all the way through the finished product. The boards are completely impervious to water. The boards can be sawn, drilled and screwed, just like real wood. You can fix it with standard woodscrews. Being heavier and denser than real wood, screw fixings are actually stronger in composite boards.

RESTRICTED ACCESS: A quality feature of these buildings is that they are made in large rigid panels. If access is restricted, your building can be specially made in smaller sections designed to pass through a normal single door. The smaller sections are designed to be at least as strong as the larger panels normally supplied. There is a charge for this option and notice is required with the order. For more details see "Other options".