Click this messge to hide it.
- All timber used in the construction of this gazebo originates from sustainable forests
- Gazebo canopy approximately 9'5" wide (2.88m) on all sizes
- Summerhouse size approximately 8'2"x8'2" (2.5x2.5m) on 8'2"x17'8" (2.5x5.38m) buildings
- Summerhouse size approximately 8'2"x9'10" (2.5x3.0m) on 8'2"x19'3" (2.5x5.88m) buildings
- Summerhouse size approximately 9'10"x9'10" (3.0x3.0m) on 9'10"x19'3" (3.0x5.88m) buildings
- Chunky 120mm x 120mm corner support post
- 28mm thick tongued and grooved wall logs
- Unique patented wall jointing system with concealed aluminium connectors and 120x120mm timber posts
- Easy assembly of the walls with no nails or screws, which also allows for timber movement
- Door glazed with annealed glass (no plastic, acrylic, styrene or perspex)
- Premium double glazed door with rubber weatherstrips to reduce draughts
- Door is joinery made with fully profiled timbers and morticed and tenoned joints throughout
- Single hinged door, half glazed with high security mortice lock and lever handles
- Single door 2'6" wide x 6'4" high (770mm x 1930mm)
- Single door is hinged on the left side (as viewed from outside) if the canopy is mounted to the right of the summerhouse and vice versa
- Durable aluminium door threshold
- Chrome plated door handles
- Partition to create an integral summerhouse
- Canopy includes a plain fully boarded rear wall as standard
- As with most log cabins, the roof is supplied unassembled with the rafters and roof boards cut to size
- These gazebos are untreated as standard
- Foundation beams ex 3"x2" (70mm x 45mm) pressure treated (lifetime preservative treatment)
- Strong 18mm thick tongued and grooved roof boards (finished size after machining)
- Substantial timber fascia boards to front, rear and sides
- Durable and low maintenance one piece EPDM rubber roof surface with drainage outlet and downpipe
- Eaves height approximately 7'3" (2230mm)
- Ridge height approximately 8'2" (2500mm)
- External roof overhang approximately 9" to all sides (230mm)
- This building is easy to deliver if access is restricted - all sections will pass through a normal single door
UNIQUE LOG ASSEMBLY: This quality garden room features a unique corner assembly system, which is both attractive and strong and combines the benefits of a log cabin with a conventional summerhouse. Each wall log slots into sturdy 120x120mm posts featuring full length concealed aluminium connector poles. This gives a modern appearance and simplifies the installation. The first log is laid at the bottom and the rest slot into each other, working upwards one log at a time. The logs and the aluminium connectors are precision milled to ensure a neat fit. No screws or nails are required which makes installation easier whilst also allowing for timber movement. The finished corner assembly is strong, weatherproof and draughtproof.
NORDIC SPRUCE: This building is manufactured from 100% Nordic Spruce, the best quality timber used in log cabin construction. Nordic Spruce is grown primarily in the well managed forests of Scandinavia, Siberia and the coldest parts of Northern Europe. The cold climate ensures slow growth. The growth rings are much closer together than trees grown in warmer climates. As a result the timber is heavy and durable with a dense grain pattern. These forests are expertly managed on a sustainable basis so Nordic Spruce is an enviromentally friendly choice.
PRESSURE TREATED FOUNDATION BEAMS: Substantial foundation beams are laid on the base to support the walls. This ensures that the wall logs are not in contact with the ground. The foundation beams are pressure treated for durability. Pressure treatment is a lifetime preservative treatment. The preservative is forced into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently fixed in the wood. Tanalith E is the most popular preservative used so pressure treated wood is often described as tanalised. With the foundation beams this log cabin can be built without a floor if required.
ONE PIECE EPDM ROOF: A tough EPDM rubber membrane is made in one piece to the size of your roof with no joins. It is easily fitted within a few minutes at normal temperatures with no heat required. EPDM rubber is completely inert, UV stable and not affected by extreme temperatures. It never perishes and it will not rot, split, crack or degrade. EPDM rubber lasts for years with little or no maintenance. It has been widely used in flat roofing for over 40 years from Alaska to the Middle East. It is increasingly popular in the UK where it is widely used for re-roofing flat roof garages and extensions. Even in extreme weather conditions EPDM rubber remains flexible and it will stretch to absorb any movement as a timber roof expands and contracts with the seasons.
SIZES - LENGTH AND WIDTH: Sizes are sometimes rounded to the nearest nominal size for ease of reading but the correct external wall sizes are listed alongside the price. The first dimension listed is the depth and the second dimension is the width. The depth refers to the sides. The width refers to the fully boarded rear wall. All sizes quoted are the external gazebo sizes and do not include any roof overhang, unless stated otherwise. Many other suppliers quote the overall roof size which is much larger. All sizes are approximate.