- Choice of pressure treated timber (lifetime preservative treatment) or timber treated by total immersion in a high quality preservative
- High quality external paint system offered in a wide choice of colours. The coloured paint finish is applied externally to the timber. Choice of one or two colours.
- Pressure treated 3" x 3" floor bearers (lifetime preservative treatment)
- Heavy duty floor with ex 3/4" thick tongued and grooved boards (15mm finished size after machining)
- Wooden shelves
- Additional security features
- One piece EPDM rubber roof membrane, a tough roof surface which is virtually maintenance free
- Recycled plastic base kits
- Choice of black or white PVCu guttering with downpipe
- Timber frame platform base - fully fitted (must be installed onto existing solid patio base)
- This shed can be made in smaller sections if access is restricted
PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with normal wood preservative in any colour.
COLOURED EXTERNAL PAINT FINISH: This building is available treated with a high quality microporous paint system in a choice of opaque colours. Microporous woodstains are impervious to water but not to water vapour, which allows the wood to breathe. Microporous woodstains offer superior absorption and protection plus greater durability. One or two colours can be chosen, with the doors, windows and fascias being painted the same colour as the external cladding or different. The appearance of colours and shades may vary between different screens or devices. Although our opaque preservative finish largely obscures the surface of the wood, the grain and other natural features may still be discernible through variations in colour and texture.
FLOOR BEARERS: Bearers are substantial pressure treated beams under the floor, which will prolong the life of your garden shed. The bearers are the only part of the garden shed which is in contact with the ground and they are pressure treated for longer life. The bearers also raise the floor above the ground. This allows air to circulate under the floor to reduce dampness and also reduces saturation of the lower cladding boards.
TIMBER FRAME BASE - FULLY FITTED: A pressure treated timber frame base is a substantial platform which can be built onto an existing firm base, such as slabs, concrete or decking. The frame is made from ex 4"x2" pressure treated timber bearers. Pressure treatment is a lifetime preservative treatment. Additional floor bearers are not needed as the floor will be a few inches above the ground and the timber base allows for better airflow than other base options, which improves the longevity of your new building. The floor of your building is laid on the completed platform, which is designed to be the perfect size to suit your building. This is an ideal option if the building will be going on an oversize existing patio base. It can also be a useful way of levelling out an imperfect base. This base option isn't suitable for areas covered by grass, soil, shingle, etc. The prices include installation on the same day as your building. The prices do not include a survey and assume no excavation or obstructions such as existing buildings, garden walls, compost heaps, trees, plants or flowers beds. You should also avoid covering manhole covers, pipes and drains.
HEAVY DUTY FLOOR: The standard floor is stronger than most garden shed floors and suitable for normal use. It features 12mm thick tongued and grooved boards with 2" thick floor joists spaced close together for improved strength. The heavy duty floor features the same bearer size and spacing but with 15mm thick tongued and grooved boards, which is exceptionally strong and suitable for storing heavier items.
ONE PIECE EPDM ROOF: A tough EPDM rubber membrane is made in one piece to the size of your roof with no joins. It is easily fitted within a few minutes at normal temperatures with no heat required. EPDM rubber is completely inert, UV stable and not affected by extreme temperatures. It never perishes and it will not rot, split, crack or degrade. EPDM rubber lasts for years with little or no maintenance. It has been widely used in flat roofing for over 40 years from Alaska to the Middle East. It is increasingly popular in the UK where it is widely used for re-roofing flat roof garages and extensions. Even in extreme weather conditions EPDM rubber remains flexible and it will stretch to absorb any movement as a timber roof expands and contracts with the seasons.
RECYCLED PLASTIC BASE KITS: Our durable eco-grid and eco-paving base kits are a practical and affordable alternative to slabs or concrete. Lightweight and easy to install within a few minutes, these recycled polypropylene pavers simply click together with no fixings needed. The interlocking design helps to spread weight and ensures greater rigidity. Weed membranes are not needed below a timber floor. The self draining design prolongs the life of a timber floor. Unlike paving or concrete our plastic bases are fully relocatable. The base is normally at least 2" or 50mm larger than your building. Where space permits the base is normally laid full size but if required in a tight location our plastic pavers can be cut. Fast delivery within 3-5 days ensures that you can start work quickly.
ECO-GRID BASE KITS: Eco-grids are recommended if the sub-base is soil, sand or pea shingle but not on hard surfaces such as concrete, because the underside is not flat. Integral pegs on the underside help to level the base grids more easily in soil or sand or shingle. Our eco-grid plastic bases can support up to 200 tonnes per square metre. We offer exactly the same eco-grids as driveways and carparks. Gravel or shingle infill is not required below a timber floor. Whatever you store in your building, our eco-grids will support the weight easily. Each eco-grid is 472mm x 472mm and 40mm thick with an immensely strong 60x60mm hexagonal cell structure. Extensive preparation is not normally required - just level the soil and lay the pavers directly on soil or on a thin layer of sand or pea shingle. Any exposed edges around the base can be left unfilled or filled with gravel or shingle.
ECO-PAVING BASE KITS: Eco-paving is recommended if the sub-base is a hard surface such as concrete or paving slabs, because the pavers feature a flat and level underside. Our eco-paving is less brittle than concrete paving slabs, with a strong supporting structure. The surface looks and feels similar to pressed concrete slabs, with a slightly textured finish. Each eco-paver is 385mm x 385mm and 40mm thick. The pavers are quickly and easily easily laid over an existing hard surface.
ADDITIONAL LOCKS: Heavy duty bolts, brackets and locks are available to provide additional security for your most valuable items. A heavy duty anchor bracket with a cable and padlock can be securely wall or floor mounted into brickwork, concrete or timber. The security cable is long enough to secure several items such as bicycles or a lawnmower. Padlocks are available with a closed shackle for security or a combination lock for convenience. Heavy duty sliding combination bolts can be fitted to single or double doors. The recodable combination bolt is quick and easy to use, with no keys to lose and no time wasted looking for keys. A hasp and staple set or a pair of door brackets can also be fitted to single or double doors. Ideally two pairs of brackets or two hasp and staple locks will provide a secure fixing point at the top and bottom of the door for maximum security.
BURGLAR ALARM: This simple and effective battery operated burglar alarm kit is easy to install in any wooden garden building. The main panel features a digital keypad and a powerful built-in siren. Two pre-wired door contacts are also included complete with a length of cable which plugs into the main panel. A 9 volt PP3 alkaline battery is required, which is not supplied with the kit. The alarm is easy to set using the digital keypad. A delay allows plenty of time to enter or leave the building after setting the alarm. Once the alarm has been armed it will be triggered by opening the door or tampering with the wiring. When the alarm is activated the siren emits a powerful and unpleasant sound to deter intruders.
SOLAR POWERED LIGHTS: These ingenious and affordable solar powered lights are easy to install with no mains wiring and they cost nothing to run. During the day the externally mounted solar panel converts daylight into electricity and recharges the batteries. The solar panel is weatherproof and suitable for outside use. It is normally positioned high on the walls of your garden shed or on the roof. Our solar internal lights solve the problem of seeing inside your garden shed at night. Our solar security lights illuminate the approach to your garden shed at night and may also deter burglars. After dusk the passive infra red movement detector switches itself on when it detects movement. The more expensive solar lights are brighter and stay on for longer.
RESTRICTED ACCESS: A quality feature of these buildings is that they are made in large rigid panels. If access is restricted, your building can be specially made in smaller sections designed to pass through a normal single door. The smaller sections are designed to be at least as strong as the larger panels normally supplied. There is a charge for this option and notice is required with the order. For more details see "Other options".
